TM 9-2320-279-20-2
Transfer Case and Propeller Shaft Maintenance Instructions (Cont)
b. Installation
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Coat all pipe threads with pipe thread
sealing compound.
(1)
(2)
(3)
(4)
(5)
(6)
Install pipe plug (1).
Install nipple (2), tee (3), and pressure
switch (4).
Install three elbows (5,6, and 7).
Connect three air lines (8,9, and
10) to elbows (5,6, and 7).
Install two wires (11) on pressure
switch (4) with lockwashers (12)
and screws (13).
Install traction control valve (14)
in panel (15) with two screws (16).
c.
Follow-on Maintenance
(1) Install instrument panel
(para 7-19).
(2)
Connect batteries (para 7-91).
(3)
Start engine (TM 9-2320-279-10).
(4)
Build up air pressure and test
operation of valve
(TM 9-2320-279-10).
(5)
Shut off engine
(TM 9-2320-279-10).
END OF TASK
Change 2
9-21
