TM 9-2320-279-20-2
16-124
Change 4
Cab and Body Maintenance Instructions (Cont)
16-28. SEAT SHOCK ABSORBER REMOVAL/INSTALLATION.
a. Removal.
(1)
Remove nut (1), lockwasher (2), and
screw (3) from each end of shock
absorber (4).
(2)
Remove shock absorber (4) from
mounting brackets (5) under seat (6).
(3)
Remove plastic bearing (7) and spacer
bushing (8) from shock absorber (4).
b. Installation.
NOTE
Install shock absorber with rod up and
ends centered in mounting brackets.
(1)
Install spacer bushing (8) and plastic
bearing (7) on shock absorber (4).
(1.1) Position shock absorber (4) under
seat (6).
(2)
Install screws (3) through both ends of
mounting brackets (5) and shock
absorber (4).
(3)
Install lockwasher (2) and nut (1) on
each screw (3).
c. Follow-on Maintenance.
(1)
Adjust seat (TM 9-2320-279-10).
(2)
Stow driver’s footrest
(TM 9-2320-279-10).
END OF TASK
