TM 9-2320-279-20-2
Change 4
16-89
Cab and Body Maintenance Instructions (Cont)
g. Rear Mud Flap and Bracket Removal.
NOTE
Left and right rear mud flap and bracket assemblies are removed in a similar
manner.
(1)
Remove three locknuts (1) and screws (2).
(2)
Remove mud flap (3) and reflective tape plate (3.1).
(3)
Remove four nuts (4), lockwashers (5), and screws (6).
(4)
Remove retainer plate (7) and reflector (8).
(5)
Remove cotter pin (9).
(6)
Remove mounting bar (10).
(7)
Remove two locknuts (11) and
screws (12).
(8)
Remove support bracket (13) and spacer
plate (11).
(9)
Remove two screws (15), nuts (16), and
mounting bracket (17).