TM 9-2320-279-20-2
Suspension Maintenance Instructions (Cont)
15-2. SHOCK ABSORBER AND BUSHING REMOVAL/INSTALLATION (CONT).
a. No. 1 Axle Shock Absorber Removal.
(1)
(2)
(3)
(4)
(5)
(6)
NOTE
Do steps (1) through (3) for right side shock absorber and bushings. Do steps (4)
through (6) for left side shock absorber and bushings.
Remove two locknuts (1) from top and bottom studs (2).
Remove two cupped washers (3) and bushings (4) from top and bottom studs (2).
Remove shock absorber (5) and two bushing (4) from top and bottom studs (2).
Remove two locknuts (1) from top and bottom studs (2).
Remove two cupped washers (3) and bushings (4) from top and bottom studs (2).
Remove shock absorber (5), two bushings (4) and two cupped washers (6) from top and bottom
studs (2).
b. No. 1 Axle Shock Absorber Installation.
NOTE
Do steps (1) through (3) for right side shock absorber and bushings. Do steps (4)
through (6) for left side shock absorber and bushings.
(1)
(2)
(3)
(4)
(5)
(6)
15-2
Install two bushings (4) and shock absorber (5) on top and bottom studs (2).
Install two bushings (4) and cupped washers (6), cupped side out, on top and bottom studs (2).
Install two locknuts (1) on top and bottom studs (2).
Install two cupped washers (6), cupped side in, and bushings (4) on top and bottom studs (2).
Install shock absorber (5), two bushings (4), and cupped washers (3), cupped side out, on top and
bottom studs (2).
Install two locknuts (1) on top and bottom studs (2).
