TM 9-2320-279-20-2
Steering System Maintenance instructions (Cont)
13-16. HYDRAULIC RESERVOIR REMOVAL/INSTALLATION (M964E1) (CONT).
(3)
Soldier A and Soldier B install
reservoir (7) on fender (8).
(4)
Install three screws (9), washers (10),
lockwashers (11), and nuts (12) on left
side of reservoir (7).
NOTE
Washer is only installed on screw through
center hole of fender brace.
(5)
Install three screws (13), one
washer (15), three lockwashers (16),
and three nuts (17) on right side of
reservoir (7).
(6)
Connect hose (18) to elbow (5).
(7)
Connect hose (19) to fitting (4).
(8)
Install preformed packing (20), hose (21),
and clamp halves (22) on reservoir (7) with
four screws (23) and lockwashers (24).
c.
Follow-on Maintenance.
( I )
Install air cleaner canister (para 4-5).
(2)
Install reservoir strainers (para 13-15).
(3)
Install reservoir top plate and sight
glass (para 13-14).
(4)
Install hydraulic filter (para 13-13).
(5) Fill hydraulic reservoir
(LO 9-2320-279-12).
(6)
Check reservoir for leaks.
END OF TASK
13-60
Change 2
