TM 9-2320-279-20-2
Steering System Maintenance
b.
Installation.
(1)
Instructions (Cont)
Install pipe (1) and gasket (2) on filter housing (3).
(2)
Install filter housing (3) on reservoir (4) with four screws (5) and lockwashers (6).
WARNING
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(3)
Coat threads of plug (7) with pipe thread sealing compound and install in filter housing (3).
(4)
Install preformed packing (8) on plug (9) and install in filter housing (3).
(5)
Install preformed packing (10) on elbow (11), preformed packing (12) on fitting (13), preformed
packing (14) on fitting (15), preformed packing (16) on fitting (17) and install in filter
housing (3).
(6)
Connect four hoses (18, 19, 20, and 21).
Change 2
13-51
