TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-22. AIR DRYER SERVICE (CONT).
(6)
(7)
(8)
(9)
Install cartridge (10) in dryer
housing (11).
Tighten cartridge stud (9) to 32
lb-ft (43 N•m).
Install preformed packing (12)
in air dryer housing (11).
Aline matchmarks and install
end cover (13) in air dryer
housing (11) with retaining
ring (14).
(10) Install three retaining
clips (15) with lockwashers (16)
and screws (17).
NOTE
Some vehicles have four screws,
washers, lockwashers, and nuts.
Others have four flanged nuts and
screws.
(1)
Install air dryer assembly (1)
with four screws (2),
washers (3), lockwashers (4),
and nuts (5).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(2)
Coat threads of fitting (6) and
fitting (7) with pipe thread
sealing compound and connect
two air lines (8 and 9) to fittings.
11-80
Change 2
