Change 8
TM 9-2320-279-10-1
3-64
Operators Maintenance (Cont)
3-11. OPEN/CLOSE ENGINE COVER AND ENGINE SIDE PANEL
REMOVAL/INSTALLATION.
MODELS: All
TOOLS: None
SUPPLIES: None
PERSONNEL REQUIRED: MOS 64C, Heavy vehicle driver
a. Open Engine Cover.
(1)
Pull top rubber hooks (1) up and out.
(2)
Lift hood (2) slowly until it lays on top of engine compartment.
b. Engine Side Panel Removal.
NOTE
S
Both right and left engine side panels are removed
the same way, except where noted.
S
Right engine side panel removal shown.
(1)
Remove spare tire (refer to para 3-6).
(2)
Pull bottom rubber hook (3) up and out.
(3)
Slide engine side panel (4) towards rear of vehicle so stud (5) clears
mount (6).
(4)
Lift and remove engine side panel (4) from vehicle.
c. Engine Side Panel Installation.
(1)
Lift and install engine side panel (4) on vehicle.
(2)
Slide engine side panel (4) towards front of vehicle so stud (5) inserts
into mount (6).
(3)
Pull bottom rubber hook (3) up and connect to engine side panel (4).
(4)
Install spare tire (refer to para 3-6).
d. Close Engine Cover.
(1)
Pull hood (2) forward.
(2)
Push in engine side panel (4) and lower hood (2).
(3)
Pull top rubber hooks (1) up and connect to hood (2).
