TM 9-2320-279-10-1
Operators Maintenance (Cont)
3-6. CHANGE WHEEL AND TIRE ASSEMBLY (CONT).
c.
Remove Flat Tire or Wheel.
(1)
Remove jack (1) and jack base plate (2) from stowage.
(2)
It may be necessary to place wheel chock (3) under flat tire (4) to get
jack (1) under equalizer beam (5).
(3)
Position jack (1) and jack base plate (2) under equalizer beam (5).
(4)
Unscrew jack ram (6) until it touches equalizer beam (5)
approximately 4 to 5 in. (102 to 127 mm) from beam center pivot
point (7).
3-46.2
Change 5
