TM 9-2320-279-10-1
Change 8
2-409
Operation Under Unusual Conditions (Cont)
CAUTION
PTO ENGAGE switch must be in OFF position before
moving selector valve to prevent equipment damage.
(3)
Make sure PTO ENGAGE switch (2) is in OFF position.
(4)
Pull out selector valve control (3).
(5)
Start engine (para 2-11b).
(6)
Check that transmission range selector (4 or 4.1) is set to N (neutral).
(7)
Set PTO ENGAGE switch (2) to ON.
(8)
Move winch shift lever (5) to OUT position to pay out small amount of
cable.
(9)
Set winch shift lever (5) to center position.
(10)
Set PTO ENGAGE switch (2) to OFF.
