TM 9-2320-279-10-1
Auxiliary Equipment Operation (Cont)
(4)
Install arctic heater (5) into water jacket (6) as follows:
(a)
(b)
(c)
(d)
(e)
(f)
Remove cover (7) from water jacket (6).
Turn wingnut (8) on heater (5) counterclockwise to open
mounting clamp (9).
Check gasket (10) for proper placement and cuts, tears, and
deterioration.
Insert, heater (5) into water jacket (6) with hand pump lever (11)
in vertical position.
Turn wingnut (6) clockwise to tighten mounting clamp (9)
securing heater (5) in water jacket (6).
Insert heater cable (12) into cable receptacle (13) in cab, and
receptacle (14) on heater (5).
Change 5
2-362.1
