TM 9-2320-279-10-1Change 6 2-56.3Table 2-1. Preventive Maintenance Checks and Services for Models M977 thru M985E1With Three Piece Split RimLocationItemNo.IntervalItem toCheck/ServiceCrewmemberProcedureNot Fully MissionCapable If:DRIVER40AfterSpareTire/Wheela. Check tire for cuts,gouges, cracks, or scratches.Remove any sharp objects.a. Tire has cuts,gouges or crackswhich would result intire failure during op-eration. Tire missingor unserviceable.b. Inspect wheels complete-ly for any cracked, broken, orbent surfaces. Check for dis-colorations or warping thatmay indicate excessive heator impact damage. Check therim, side rings, and lock ringsfor any cracked, broken orbent ends or surfaces,cracked paint or impact dam-age. Check the lug nut areafor evidence of elongatedmounting holes that may indi-cate a wheel is loose. Checkwheel components for pittingfrom corrosion, discoloration,deformation, or warping thatmay indicate excessive heat.Check that the lock ring endsdo not touch and that the lockring fits securely in the wheelgroove against the side ringand has a uniform seated ap-pearance around the entirewheel circumference. Checkall visible surfaces that con-tact the lock ring for damagethat may indicate loose ordamaged parts. Check lockring for a raised notch and en-sure it faces away from thewheel.b. Wheel, side ring,or lock ring iscracked, broken,bent, discolored byheat, warped, misa-ligned, loose, im-properly mounted, ordamaged by impactor wear. The wheelhas two or moreelongated or dam-aged holes on thesame wheel. Thelock ring ends touch,or the raised notch ismissing or facing thewheel.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business