TM 5-5420-234-14&P
-- KEY --
EXPECTED TEMPERATURES
Above 32F
+40F to 10F
0F to 65F
INTERVALS
LUBRICANTS
(Above 0C)
(+4C to 23C)
(18C to 54C)
OE/HDO - Lubricating Oil, Internal
D - DAILY
Combustion Engine, Tactical
M - MONTHLY
AR - AS REQUIRED
OEA - Lubricating Oil, Internal Combustion
OE/HDO 10
OE/HDO 10
OEA
Engine, Arctic
HR - HOURS
S - SEMIANNUALY
GAA - Grease, Automotive and Artillery
(6 MONTHS)
CW - Corrosion Prevention Compound
ALL TEMPERATURES
1.5 - 1500 MILES
Antiseize Compound
NOTES:
WARNING
Drycleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use
only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not
breathe vapors. Keep away from heat or flame. Never smoke when using drycleaning
solvent; the flashpoint for Type II is 140 degrees F (60 degrees C), and for Type III it
is 200 degrees F (93 degrees C). Failure to follow this warning may result in injury or
death to personnel.
1. FOR OPERATION OF EQUIPMENT IN PRO-TRACTED COLD TEMPERATURE BELOW 10F (23C). Remove
lubricants prescribed in the KEY for temperatures above 10F (23C). Clean parts with drycleaning solvent (Item
13 or 14, Appendix E). Relubricate with lubricants specified in the KEY for temperatures below 10F (23C).
2. LUBRICANTS. The following is a list of lubricants with military symbols and applicable specification numbers:
OE/HDO -
MIL-L-2104, Grade 10
OEA -
MIL-L-46167
GAA -
MIL-G-10924
CW -
MIL-C-16173, Grade 1
OIL CAN POINTS
3. OIL-CAN POINTS. Every
month lubricate all pivots,
shackles, screw threads, hinges,
and other components that
require lubrication but are not
provided with lubrication
fittings.
G-13
