TM 5-5420-234-14&P
6-2.
HOOK ARM/MAIN FRAME CYLINDER REPAIR (continued).
(6) Apply lubricating oil to inside diameter of rod bearing (4).
(7) Install rod bearing (4) on rod (2).
(8) Install rod lug (7) on rod (2).
(9) Position nylon plug (8) and screw (6) in rod lug (7).
(10) Tighten to 41 lb-ft (56 Nm).
(11) Install lube fitting (9) on rod lug (7).
9
6
8
2
4
7
WARNING
Cylinder weight exceeds the handling weight for one person. Two people are
required to lift and handle cylinder. Failure to comply may result in injury to
personnel.
CAUTION
Transfer tube is mounted along axis of cylinder. Use blocks to protect transfer tube
when clamping cylinder in a chain vise, or damage to equipment may result.
(12) Using lifting device, place cylinder (1) in chain vise.
6-8
