TM 5-5420-234-14&P
5-30. HOOK ARM CYLINDER REPLACEMENT (continued).
(4) Install hoses (17) on hook arm (1) with two clips (16), screws (15), and new locknuts (14).
(5) Install hoses (17) on hook arm (1) with two piece clamp (13), plate (12), two washers (11), new
lockwashers (10), and screws (9).
14
16
15
1
14
13
16
11
18
15
10
9
12
17
d. Right Cylinder Installation.
NOTE
Left cylinder must be installed prior to right cylinder installation.
(1) Attach lifting device to right hook arm cylinder (4).
(2) Position right hook arm cylinder (4) on two pins (8 and 7) with the aid of an assistant and lifting device.
(3) Install new locknut (5) and new lockwasher (6) on pin (8).
5-164
