TM 5-5420-234-14&P
5-18. HOOK ARM HYDRAULIC TUBE (MAIN FRAME) REPLACEMENT (continued).
2
NOTE
Step 15 applies to tubes on left side
only.
(14) Remove two screws (27), lockwashers (28),
proximity switch and clamp (29). Do not
separate clamp halves.
28
27
27
29
28
(15) Remove two tube nuts (30) from bulkheads (31) at inside rear of main frame (2).
(16) Pull tubes (25 and 26) from bulkheads (31) and remove o-rings (32), spacers (33), compression rings (34),
and nuts (30) from tubes.
(17) Remove tubes (25 and 26) from main frame (2). Discard o-rings.
2
31
32
33
34
30
25
5-117
