TM 5-5420-234-14&P
5-17. HYDRAULIC HOSE REPLACEMENT (continued).
(1) Clean both hose fittings (1 and 2) on hose (3) being removed.
(2) Disconnect both hose fittings (1 and 2) from fitting (4) and adapter (5).
3
1
2
5
4
b. Installation.
CAUTION
Only use replacement hydraulic hoses with the same inside diameters, pressure
ratings, length, and fittings as original equipment. Failure to comply may result in
damage to equipment.
(1) Position hose (3) by connecting hose fittings (1 and 2) loosely on adapter (5) and fitting (4).
(2) Tighten hose fittings (1 and 2).
c. Follow-on Maintenance:
Start engine and operate system (Chapter 2).
Inspect hoses for leaks, interference, twisting, or binding.
Check hydraulic fluid level (LO 9-2320-279-12).
Remove wheel chocks.
END OF TASK
5-111
