TM 5-5420-234-14&P
4-70.1 DIGITAL CONTROLLER WIRING HARNESS REPLACEMENT (MODEL B ONLY)
(continued).
b. Installation.
NOTE
Install cable ties as needed.
(1)
Connect cab interface plug ends (44). Position access panel (42) onto vehicle (43) and secure with three
thumb screws (41).
(2)
Connect worklight connector (39) to stationary worklight harness (40).
(3)
Position LHS bulkhead connector (37) onto bulkhead plate (38) and secure with four screws (36).
4-584.8
Change 2
