TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
21. REMOTE CONTROL LIGHT INOPERATIVE, ERROR CODE 25, (MODEL B ONLY)
(continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut
off from circuit before continuity
can be checked. Failure to
comply with this caution may
result in damage to test
equipment or electrical
system.
(1) Remove cap from connector (J8B),
remote control cable connection
point.
(2) Set multimeter to ohms position.
J3
NOTE
POSITION
A reading of infinity indicates an
24
open circuit.
(3) Connect multimeter leads to each end
of wire and check multimeter for
continuity. Check for continuity
between digital controller wiring
harness (J3), position "24", and
remote control connector (J8B),
position "L".
J8B
POSITION
L
Change 1
4-44-4.39
1 425
