TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
16. MAIN FRAME, HOOK ARM, AND WINCH DO NOT OPERATE (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut
off from circuit before continuity
can be checked. Failure to
comply with this caution may
result in damage to test
equipment or electrical
system.
(1) Set multimeter to ohms position.
NOTE
WIRING REMOVED FOR CLARITY
A reading of infinity indicates an open
circuit.
(2) Place one multimeter lead on terminal
strip, position 24, and the other
multimeter lead on a known good
ground. Check multimeter for
continuity.
4-377
