TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
8.
OIL TEMPERATURE LIGHT DOES NOT OPERATE PROPERLY (MODEL A ONLY)
(continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply
with this caution may result in
damage to test equipment or
electrical system.
(1) Set multimeter to ohms position.
NOTE
A reading of infinity indicates an
open circuit.
OIL TEMPERATURE
(2) Connect multimeter to terminals at
SWITCH TERMINALS
each side of oil temperature switch,
and check multimeter for continuity.
4-149
Change 1
