TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
8.
OIL TEMPERATURE LIGHT DOES NOT OPERATE PROPERLY (MODEL A ONLY)
(continued).
OIL
TEMPERATURE
LIGHT
OIL TEMPERATURE CIRCUIT TEST
(1) Install jumper between termi-
nals on oil temperature switch.
(2) Turn engine start switch to ON
position.
(3) Turn light control switch to
STOP LIGHT position.
(4) Observe status of oil tempera-
ture light.
(5) Turn engine start switch and
light control switch to OFF
position.
(6) Remove jumper from oil tem-
perature switch.
OIL
TEMPERATURE
SWITCH
~
BRACKET
HYDRAULIC
MANIFOLD
OIL TEMPERATURE
SWITCH TERMINALS
OIL TEMPERATURE
SWITCH TERMINALS
Change 1
4-133
