TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
5.
HAND-HELD SPOTLIGHT DOES NOT OPERATE (MODEL A ONLY) (continued).
CONTINUITY TEST
CAUTION
Electrical power must be shut off
from circuit before continuity can
be checked. Failure to comply with
this caution may result in damage
to test equipment or electrical sys-
tem.
(1) Set multimeter to ohms position.
NOTE
WIRING REMOVED FOR CLARITY
A reading of infinity indicates an
open circuit.
(2) Connect multimeter terminals to each
end of wire, and check multimeter for
continuity. Check between spotlight
SPOTLIGHT WIRE
harness connector position A and
HARNESS CONNECTOR
terminal strip position 5. Also check
between spotlight harness connector
position B and terminal strip position
16.
4-4-12.1
1 113
Change 1
