TM 5-5420-234-14&P
2-17. CALM OR FAST WATER BRIDGE BAY RETRIEVAL (continued).
WARNING
Reposition and lock both rear guides after bridge bay retrieval. Failure to
reposition and secure rear guides after bridge bays are loaded could result in lost
bridge bays or Transporter rollover during transport, causing death or severe
injury to personnel.
ah. Make sure both front pin lock assemblies are secured to bridge bay pins and both rear guides are properly
locked.
CAUTION
While maneuvering Transporter in the immediate vicinity of the loading or
unloading site, LHS MODE SELECT switch may be in any setting. However,
LHS MODE SELECT switch must be set to OFF/TRANSPORT prior to road
travel, to prevent damage to main frame and hook arm cylinders.
ai. Position WINCH switch (22) to OUT
and release when winch cable tension is
released.
aj. Position PTO ENGAGE switch (17) to OFF.
PTO ENGAGE
22
17
15
14
OFF
ON
13
ak. Disconnect and stow remote control unit (12):
(1)
Disconnect cable (13) from LHS
receptacle (15).
12
(2)
Coil and stow cable (13) in rear of
stowage box (14).
(3)
Stow remote control unit (12) in
stowage box (14).
2-101
