M978 Tanker Maintenance Procedures Instructions (Cont)
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Clean all metal parts with dry cleaning solvent.
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use
only with effective chip guarding and personal protective equipment, goggles,
shield, and gloves.
Dry metal parts with compressed air.
Inspect each part for damage.
Replace damaged parts.
(1) Install fill cover (1) and bellows (2) on closure assembly (3) with lockwasher (4), and nut (5).
Install plug (6) on closure assembly (3).