M978 Tanker Maintenance Procedures Instructions (Cent)
Note OUTLET end and remove sensor body (2) and deflector (7) from collector can (8).
Remove collector can (8) from PRECHECK can (6).
Remove plug (9) from collector can (8).
Remove two plugs (10) from collector can (8).
Remove plug (11) from PRECHECK can (6).
Adhesives, solvents, and sealing compounds can burn easily,
can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap
(1) Clean all parts with dry cleaning solvent.
Compressed air used for cleaning purposes will not exceed
30 psi (207 kPa). Use only with effective chip guarding and
personal protective equipment, goggles, shield, and gloves.
(2) Dry parts with compressed air.
(3) Inspect all parts for damage.
(4) Replace damaged parts.