TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
e. Type 2 Clamp Removal. Remove two screws (1),
spacers (2), and clamps (3).
f. Type 2 Clamp lnstallation. Install clamps (3) and
spacers (2) with two screws (1).
g. Type 3 Clamp Removal. Remove screw (1),
lockwasher (2), and clamp (3).
h. Type 3 Clamp Installation. Install clamp (3)
and lockwasher (2) with screw (1).
NOTE
Do not remove screw. Screw holding clamp
also holds hoist pivot pin in place.
i. Type 4 Clamp Removal. Remove nut (1)
and clamp (2) from screw (3).
j. Type 4 Clamp Installation. Install clamp (2)
on screw (3) with nut (1).
17-16.1