Hydraulic System Maintenance Instructions (Cont)
l Left and right valve body
ends are disassembled the
l Mark valve body ends
Remove two screws (42),
screws (43), and valve body
end (44) from valve
Remove spring (45),
preformed packing (46),
and two preformed packings (47) from valve body end (44).
Remove spacer (48) and spool (49) from valve body (2).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Clean all metal parts in dry cleaning solvent.
Inspect all parts for damage.
Replace damaged parts.
Left and right valve body ends are assembled the same way.
(1) Install spool (1) in valve body (2).
(2) Install spacer (3) on valve body (2).
(3) Install two preformed packings (4), preformed packing (5), and spring (6) on valve body end (7).
(4) Install valve body end (7) on valve body (2) with two screws (8) and screws (9).