M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
Holes in gear face spline end of shaft.
(4) Install retaining ring (8), key (9),
gear (10), and retaining ring (11) on
(5) Install preformed packing (13) in ring gear (14).
(6) Install ring gear (14) on end cap (4).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(7) Apply sealing and thread locking compound and install six screws (15) and lockwashers (16) in
end cap (4).