M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-22.1. HOIST DRIVE MOTOR REMOVAL/REPAIR INSTALLATION (M984E1) (CONT).
Remove four screws (16) and flange cap (17)
from motor (6).
Remove race (18) from motor (6).
(8) Remove preformed packing (19) and dust seal (20)
from flange cap (17).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Clean all metal parts in dry cleaning solvent.
Inspect each part for damage.
Replace damaged parts.