TM 9-2320-279-34-3
NOTE
Do steps (9.2) and (9.3) for Model A cylinder.
(9.2) Install rod cap (16.2) and two
setscrews (16.3) to rod (3).
(9.3) Install two grease fittings (16.4) in rod
cap (16.2).
(10)
Install rod assembly (3) in cylinder (17).
(11)
Apply sealing and thread locking
compound and install retaining ring (2).
(12)
Install setscrew (18).
(13)
(14)
(15)
Install two bushings (19) and grease fittings (20) on each end of cylinder (17).
NOTE
Apply lubricant to preformed packings before installing.
Install preformed packings (21 and 22), backup ring (23), preformed packing (24), and two
backup rings (25).
Install holding valve (26).
d. Follow-on Maintenance. None.
END OF TASK
Change 3
17-75