TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-8. SWING DRIVE BRAKE REMOVAL/REPAlR/lNSTALLATlON (CONT).
e. Installation.
NOTE
Thick stator is installed first.
(1) Install disc (1) inswing drive unit (2).
(2) Install stator (3), disc (1), and stator (4).
WARNING
Adhesives, solvents, and sealing compounds can burn easily,
can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap
and water.
(3)
(4)
(5)
(6)
Apply adhesive-sealant to brake (5).
Aline and install brake (5).
Apply sealing and thread locking compound to four
screws (6).
Install two brackets (7) with four screws (6) and washers (8).
f. Follow-on Maintenance.
(1) Install swing drive motor (para 17-7).
(2) Install swing drive brake hydraulic line (para 17-2).
END OF TASK
1 7 - 3 8