Winch Maintenance Instructions (Cont)
(9) Install bearing (15) in housing (16).
(10) Install preformed packing (17) on adapter (2).
Preformed packing can be damaged if housing screws are not tightened evenly to
draw housing and adapter together.
(11) Aline matchmarks and install housing ( 16) on adapter (2) with six lockwashers (18) and
screws (19). tighten screws to 45 lb-ft (61 N.m).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(12) Apply adhesive-sealant to inside edges of cover (20) and install with four lockwashers (21) and