Winch Maintenance Instructions (Cont)
Remove five friction plates (12) and
four drive plates (13).
Remove spacer (14) from piston (9).
Remove packing retainer (15),
preformed packing (16), preformed
packing (17), packing retainer (18),
and preformed packing (16) from
(9) Remove 12 springs (19) and two pins (20) from adapter (8).
(10) Remove bearing (21) from adapter (8).
and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin-and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Clean all metal parts with dry cleaning solvent.
Inspect all threaded parts for crossed and stripped threads. Repair damaged threads.
Inspect all parts for damage or cracks. Replace damaged or cracked parts.
Replace any friction plate if warped, discolored by heat or worn to 0.078 in. (1.95 mm) or less.
Replace any drive plate if warped, discolored by heat or worn to 0.054 in (1.37 mm) or less.
Replace all springs if any spring is broken, discolored by heat, or if free length of any one spring
is less than 0.093 in. (23.5 mm).
Replace all damaged parts.