TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
c. Assembly.
(1)
(2)
(3)
(4)
Install cylinder bearing (1) and cylinder
bearing (2) in flange (3).
NOTE
Install thickest spacer washer with text
facing bearing.
Select spacer washers (5) based on thickness
recorded at disassembly.
Install shaft (4), two spacer washers (5 and 6)
and retaining ring (7) in flange (3).
Inspect clearance between cylinder bearing
(1) and spacer washer (5). Clearance should
be 0.000-0.003 inch (0.0-0.1 mm). Correct if
necessary by selecting alternate thickness of
spacer washer (5).
Install gasket (8) on flange (3).
Change 2
16-54.11