TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
(3) Matchmark inter-axle differential
case halves (4 and 5).
(4) Remove eight screws (6) and
locknuts (7).
(5) Separate two case halves (4 and 5).
(6) Remove four thrust washers (8),
side pinions (9), and bushings (10)
from spider (1 1).
Wear safety glasses while
removing retaining rings to
protect eyes from possible injury
or blindness.
(7) Remove retaining ring (12),
side gear (13), and bearing
cone (14) from output
(8)
(9)
(10)
shaft (2).
Remove bearing cone (14) from side gear (13).
Remove two preformed packings (15) from output shaft (2).
Remove bushing (16) from output shaft (2).
Axle 580 has no roll pin.
(11) Remove roll pin (17).
(12) Loosen locknut (18).
(13) Remove bearing CUP (19)
from carrier (3).
10-33