TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-13.1. HEAVY-DUTY WINCH HYDRAULIC MOTOR REMOVAL/lNSTALLATlON.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
M984E1
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
Para 16-12
Counterbalance valve
None
removed.
Supplies
Special Environmental Conditions
None
None
Personnel Required
General Safety Instructions
MOS 63W, Heavy wheel vehicle mechanic
None
Level of Maintenance
Direct Support
a. Removal.
(1)
(2)
(3)
(4)
(5)
(6)
Disconnect three hydraulic lines (1, 2, and 3) from motor (4).
Remove hydraulic line (5) from motor (4).
Attach suitable lifting device to motor (4).
Remove four screws (6), lockwashers (7), motor (4), and gasket (8) from winch (9).
Remove coupling (10).
Remove pin (11) from coupling (10).
16-46