TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenane. Instructions (Cont)
d. Assembly.
While installing retaining ring, wear safety glasses to
protect eyes from possible injury or blindness.
(1) Install bearing race (1) and retaining ring (2) in
differential carrier cover (3).
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Install pipe plug (4) in differential carrier cover (3).
Tighten to 40 to 60 lb-ft (54 to 81 Nm).
Install filter screen (5) in differential carrier
cover (3). Tighten to 40 to 60 lb-ft (54 to 81 Nm).
Install preformed packing (6) in
pump cover (7).
Lubricate and install threaded
shaft (8) in differential carrier
cover (3).
Lubricate and install shaft (9) on
differential carrier cover (3).
Install pump cover (7), four
screws (10), and
lockwashers (11) on differential
carrier cover (3). Tighten screws
to 85 to 105 lb-in (115 to
142 Nm).
Install pump drive gear (12) over
threaded end of shaft (8).
Install nut (13) to hold pump drive gear (12) in place. Do not tighten.
10-21