Axles No. 3 and No. 4 Maintenance Instructions (Cont)
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
(1) Apply silicone adhesive-sealant to
housing and install cover (1) with four
dowel bushings (2), 11 lockwashers (3),
and nuts (4). Tighten nuts to 110 to
130 lb-ft (149 to 176 Nm).
(2) Install lockwashers (5) and screw (6). Tighten screw to 75 to 85 lb-ft (101 to 115 Nm).
f. Follow-on Maintenance.
(1) Install yoke and oil seal (para 10-6).
(2) Lubricate axle (LO 9-2320-279-12).
END OF TASK
10-5. AXLE HOUSING COVER, AXLE NO. 4 (AXLE MODELS 580 AND 650)
REMOVAL/REPAIR/INSTALLATION (M984, M984E1).
This task covers:
d. Follow-on Maintenance
TM or Para
LO 9-2320-279-12 Axle drained.
Special Environmental Conditions
Solvent, dry cleaning, Item 57, Appendix C
Adhesive-sealant, silicone, Item 6, Appendix C
General Safety Instructions
MOS 63W, Wheel vehicle repairer
Level of Maintenance