TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13-30.1
RETRIEVER TOWING SUPPORT ASSEMBLY REMOVAL/INSTALLATION
(M984E1) (CONT).
NOTE
Some vehicles have a winch clevis tiedown. Do
steps (5.1) through (5.3) for these vehicles.
(5.1) Loosen ratchet (10.1) and remove
hook (10.2) from eye bolt (10.3).
(5.2) Remove nut (10.4), ratchet end of
tiedown (10.5), eyebolt (10.3) and
spacer (10.6).
(5.3) If damaged, remove plastic (10.7) and
adhesive (10.8).
NOTE
Remove wire clips and plastic cable ties as
necessary.
(6)
Remove six hydraulic lines (11 and 12)
from bulkhead adapters (13 and 14).
(7)
Remove nut (15), screw (16), washer (17),
and clamp (18).
(8)
Remove strobe and work lamp wiring
harness (19) from towing support (20).
(9)
Remove grommet (21).
(10)
Remove hydraulic line (22) from crane
control valve fitting (23).
(11)
Remove three hydraulic lines (24) from three
bulkhead adapters (13).
(12)
Remove three hydraulic lines (25) from
bulkhead adapters (14).
13-90.2
Change 2