Frame Maintenance Instructions (Cont)
13-24. REAR CROSSMEMBER REMOVAL/INSTALLATION (M983, M984) (CONT).]
Steps (15) through (19) apply to M984 vehicles only.
(15) Install winch support (37) with four screws (38) and nuts (39).
(16) Install light bracket (40) with two screws (41), washers (42), and nuts (43) through both ends of
Winch is heavy. Keep hands out from under and away from winch at all times.
Winch could drop, causing serious injury.
(17) Soldier A raises winch (44) with lifting device, while Soldier B removes blocking.
(18) Soldier A slowly lowers winch (44) while Soldier B installs pin (45).
(19) Install safety pin (46).