Frame Maintenance Instructions (Cont)
(1) Install two crossmember brackets (6) with four screws (5) and nuts (4). Do not tighten.
(2) Attach both ends of crossmember (3) to brackets (6) with eight screws (2) and nuts (1) at each
Install hoses, clamps, and plastic cable ties.
(3) Tighten nuts (4) to 212 lb-ft (287 N·m).
c. Follow-on Maintenance. Install rear decking (TM 9-2320-279-20).
END OF TASK
13-17.1. REAR INTERMEDIATE CROSSMEMBER REMOVAL/INSTALLATION (M984E1).
This task covers:
a. R e m o v al
c. Follow-on Maintenance
Tags, identification, Item 60, Appendix C
MOS 63W, Wheel vehicle repairer (2)
N o n e
TM or Para
TM 9-2320-279-10 Equipment body removed.
TM 9-2320-279-10 Drain air from air reservoirs
TM 9-2320-279-10 Batteries disconnected
Special Environmental Conditions
General Safety Instructions
Level of Maintenance