TM 9-2320-279-34-2
(6)
(7)
(8)
Frame Maintenance Instructions (Cont)
Remove 16 locknuts (15) and screws (16) from
top and bottom of crossmember (14).
Remove crossmember (14).
Remove eight screws (17), nuts (18), and two
crossmember brackets (19).
b. Installation.
NOTE
Chamfered side of bracket faces rear of vehicle.
(1) Install two crossmember brackets (1) with
eight screws (2) and locknuts (3). Do not
tighten.
(2) Install crossmember (4) with 16 screws (5)
and locknuts (6).
(3) Tighten nuts (3) on two crossmember
brackets (1).
NOTE
Tighten nuts on M984 to 280 lb-ft (379 Nm).
Tighten nuts on M984E1 to 460 lb-ft
(623 N.m).
Tighten nuts on all other vehicles to 170 lb-ft
(230 N.m).
(4) Install torque rod (7) with four screws (8),
eight washers (9), and four nuts (10).
13-29