Steering System Maintenance Instructions (Cont)
12-6. SLAVE STEERING GEAR AND PITMAN ARM REMOVAL/REPAIR/INSTALLATION
Install preformed packing (18) on
cylinder head (19).
Aline matchmark on cylinder head (19)
with matchmark on housing (2) and
install cylinder head.
Install 10 lockwashers (20) and screws
(21). Tighten screws to 55 lb-ft
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
Coat threads of reducer bushing (22),
three adapters (23), elbow (24), and
plug (25) with pipe thread sealing
compound and install.
Coat threads of eight screws (3) with thread
locking compound. Install bracket (1) on slave
steering gear housing (2) with eight screws (3)
and lockwashers (4). Tighten screws to
85 lb-ft (115 NSm).