TM 9-2320-279-34-1
Transfer Case Maintenance Instructions (Cont)
(11)
(12)
(13)
(14)
(15)
Check the eight spring disks (15) and spacer (16) are assembled on lower shift rod assembly (17)
as shown.
Install lower shift rod assembly (17) in front case half (4) with spring disk end down and
spacer (16) against front case half.
Install spacers (18 and 19) on lower rear
output shaft assembly (20).
Install lockwasher (21) and locknut (22).
Tighten locknut to 180 to 220 lb-ft (244
to 298 Nm).
Using hammer and punch, bend up
tangs (23) of lockwasher (21).
Change 3
8-21