Transmission Maintenance Instructions (Cont)
(1.1) Install lifting bracket on turbine shaft (7).
Install fourth clutch alinement fixture on fourth clutch assembly (4).
Compressed air can cause injury. Compressed air in shop will not exceed 30 psi
(207 kPa). Use only with effective chip guarding and personal protective
equipment, goggles, shield, and gloves.
Apply air pressure to port (6) to lock up fourth clutch plates.
Soldier A holds air pressure in fourth clutch assembly (4) while Soldier B removes fourth clutch
Soldier A continues to apply air pressure in fourth clutch assembly (4) while Soldier B lifts and
installs forward clutch assembly (8) by turbine shaft (7) into transmission housing (5).
Soldier A stops applying air pressure when Soldier B says forward clutch assembly (8) is fully
seated in transmission housing (5).
Install torque converter housing (para 7-9).
Install control valve body (para 7-20).
END OF TASK