Transmission Maintenance Instructions (Cont)
7-6. FLYWHEEL ASSEMBLY REMOVAL/REPAIR/INSTALLATION (CONT).
Soak lockup clutch plate (14) in
lubricating oil for 3 minutes and
On transmission prior to Serial No. 83229,
the old style flywheel and backplate were
used. If either flywheel or backplate are to be
replaced, they must be replaced with the new
two keyed flywheel and backplate.
Aline notch (15) with key (12) and
install backplate (16) flat side first in
Gear on torque converter turbine must be
lined up with teeth of lockup clutch plate
Install torque converter turbine (17) on