TM 9-2320-279-34-1
6-120
Change 5
Electrical Systems Maintenance Instructions (Cont)
6-15. CHASSIS WIRING HARNESS REMOVAL/INSTALLATION (CONT).
NOTE
Left and right clearance light wiring
harnesses are installed the same.
(24)
Connect clearance light
wiring harness (65) with
electrical butt
connector (66).
(25)
Close loom (67) over
clearance light wiring
harness (65).
(26)
Connect 4-pin crane power
connector (68).
NOTE
·
Do step (27) for M978 only.
·
Do step (27.1) for M978 only if equipped with high mount stop light.
(27)
Connect tanker module power connector (69) at left rear of frame (34).
(27.1) Connect high mount stop lamp connector (69.1) under left rear of vehicle.