TM 9-2320-279-34-1
Change 5
6-105
Electrical Systems Maintenance Instructions (Cont)
NOTE
·
Remove clamp, cushion
clips, and plastic cable ties
as necessary.
·
Cushion clips are returned
to same positions after
section of chassis harness is
removed.
(3)
Remove nut (7),
lockwasher (8), washer (9),
screw (10), and cushion
clip (11) from chassis wiring
harness (12).
NOTE
Do step (4) for wiring each
rear composite light.
(4)
Disconnect four
connectors (13).
NOTE
·
Do step (5) for M978 only.
·
Do step (5.1) for M978 only if equipped with high mount stop light.
(5)
Disconnect tanker module power connector (14) at left rear of frame (15).
(5.1) Disconnect high mount stop lamp connector (15.1) from under left rear of vehicle.