TM 9-2320-279-34-1
Change 5
6-17
Electrical System Maintenance Instructions (Cont)
b. Installation.
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Apply electrical sealant to exposed wire
connectors after installing connectors.
(1)
Install connector (1) on motor
terminal (2).
(2)
Position solenoid (3) on starter (4) and plunger (5).
(3)
Install connector (1) on field terminal (6).
(4)
Install clip (7) over seal (8) on plunger (5).